So you are looking for a flexible flash/macro flash bracket? You came to the right place. Or how about a flexible reflector holder? Why spend $40-$70 for one of these Flash Brackets that uses the same parts? Or $45-$50 for one of these Reflector/misc holders?
All the Flexible parts you need can be found at ModularHose.com and I will provide a list of the parts you will need. There are two sizes that you can use to build the arm: 1/2″ and 3/4″. For the setup I made, I used the 1/2″ fittings at 6 beads long, but It didn’t seem strong enough to hold my Pentax 540 flash(380 g) so I moved to 3/4″. If your flash weights around 380 grams or more I suggest you use the 3/4″ system. If you are using a smaller slave type flash, you should be able to use the 1/2″ system.
In order to connect your camera to your off camera flash you will need a sync cable or something similar, or you can do it wirelessly if your camera and flash support it. I do it both ways.
Permalink to this topic



